Titanium Grade 5 Round Bar, ASTM B348

Titanium Grade 5 Round Bar, ASTM B348

The alloy for Titanium Grade 5 Round Bar is the most commercially viable of all titanium alloy grades. The specification which covers titanium alloy is the ASTM B348. This particular specification envelopes annealed Titanium Grade 5 Hexagonal Bar, which have been constructed from titanium based alloy.

In the case of intentionally added elements which have been added to the melt, they are required to be identified, analyzed and reported in the chemical analysis of the Titanium Grade 5 Hollow Bar, as mentioned in the specification.

Specimens to be taken from the Titanium Grade 5 Rounds, in order to conduct the tension tests need to be machined. Further the tensile properties of the Titanium Grade 5 Cold Drawn Round Bar is to be determined using a specified strain rate through the yield strength with an increasing rate. Each annealed Titanium Grade 5 Threaded Bar material can be furnished as required by the client using this specification.

Therefore the Titanium Grade 5 Titanium Square Bar could be furnished by conducting any one of the following processes - descaling, sand blasting, grinding, or rough turning. Titanium Grade 5 Round Bar note that this alloy tends to be significantly stronger in comparison to commercially pure titanium grades. Although the thermal conductivity properties of the Titanium Grade 5 Flat Bar have been excluded, which is about 60% lower in Grade 5 Ti as compared to CP Ti? Apart from the above mentioned properties, the Titanium Grade 5 Bright Bar an excellent combination of properties such as its good resistance to corrosion, good weldability and good fabric-ability along with the Titanium Grade 5 Hex Bar having good toughness properties as well.

Titanium Grade 5 Round, Bright, Hex, Threaded Bar Specification

• Titanium Bar Grade: Titanium Grade 5 (UNS No. R56400) Round Bars 3.7165
• Titanium Grade 5 Rod: Diameter: 0.8 – 40mm; Length: ≤6000mm
• Titanium Grade 5 Bar: Diameter: 6.0 – 350mm; Length: ≤6000mm
• Specification of Titanium Grade 5 Bar: AMS 4905, 4911, 4920, 4928, 4930, 4931, 4932, 4934, 4935, 4954, 4963, 4965, 4967, 4993, AMS-T-9046, AMS-T-81915,AS7460, AS7461, ASTM B265(5), B348(5), B367(C-5), B381(F-5), B861(5), B862(5), B863(5), F1472, AWS A5.16 (ERTi-5), MIL SPEC MIL-T-81556
• Standard Specification : ASTM B348 / ASME SB348

Ti-6Al-4V round bar stock

• ASTM B348
• AMS 4928
• AMS 4967
• AMS 4965 (in 4” diameter and smaller)
• AMS 6932 (for parts requiring good weldability and ductility)
• MIL-T-9047

Ti Grade 5 Bar Delivery condition

• Peeled, center less ground & polished
• The strain Hardened
• Cold drawn Titanium Grade 5 Forged Bar
• Trailed center less ground & polished
• Turned & rough polished Titanium Grade 5 Hex Rod
• SMOoth Turned & Polished Titanium Grade 5 Rod
• Peeled and polished Ti CP Gr5 Square Bars
• Hardened strain Grade 5 Titanium Polished Bar
• Annealed Titanium Grade 5 Welding Rod
• Solenoid quality Hot Rolled Titanium Grade 5 Threaded Bar

Titanium 5 round bars Cut to size

• All Titanium 5 Bars can be cut to size to tolerances of ± 1.0 mm (0.040 in)

Commercially pure and alloyed grades are also available. Stock of Grade 5 Solid Titanium Round Bar, for Strength Lightweight Corrosion and Heat Resistance

What is Grade 5 Titanium round bar?

The chemical composition of the specified Grade 5 ASTM Rectangular Bar stands at 6% aluminium, 4% vanadium, a maximum of 0.25% iron, a maximum of 0.2% oxygen, with the remainder being its primary element i.e. - titanium. According to the specification, the ASTM B348-13 Grade 5 Black Bar, which has been covered here, needs to conform to the required chemical composition requirements.

We can produce Grade 5 Titanium round bar in following forms & shapes:

Grade 5 Titanium Round Bar Length

• Metric system: standard length is 9 - 12 metres
• USA : 40 feet